 |
 |
401AL Roof Mount (for most weathervanes)
The 401AL roof mount adjusts to the pitch of most roof tops
|
|
|
 |
401LG - Roof mount for Large "Signature Series" weathervanes
14"L x 19"H x 4"W...For all Good Dimensions "Signature Series" weathervanes, and also models 616, 656, 669, 670, 671 and 907
You Save! 5% |
|
|
 |
Four Sided Roof Mount (special applications)
14"L x 19"H x 4"W....
For all Good Dimensions "Signature Series" weathervanes, and also models 616, 656, 669, 670, 671 and 907
|
|
|
 |
Adapter for 401AL to allow mounting over roof vent
Does NOT include the 401AL roof mount. These are only the two black pieces (in the photo) that allow the 401AL to be mounted over a roof vent. The 401AL must be purchased separately.
|
|
|
 |
Cupola Hole Plug kit
Our cupolas come "weathervane ready", with a 3/4" hole in the roof to accomodate a weathervane rod. If you're not mounting a weathervane rod through the hole, you can plug it with this brass plug.
|
|
|
 |
Heavy duty wall bracket (12" from wall)
Allows mounting a weathervane to the side of your home with no more than a 11 1/2" roof overhang (the rod holding your weather vane must clear the roof). Not recommended for Signature Series vanes
|
|
|
 |
Stainless Steel Mount for Eaves (5" from wall)
Allows mounting a weathervane to the side of your home with no more than a 4 1/2" roof overhang (the rod holding your weather vane must clear the roof). Not recommended for Signature Series vanes
|
|
|
 |
Steel Mount for Eaves (5" from wall)
Allows mounting a weathervane to the side of your home with no more than a 4 1/2" roof overhang (the rod holding your weather vane must clear the roof). Not recommended for Signature Series vanes
|
|
|
 |
Brass Wall Bracket (to hold weathervane figure only)
|
|
|
 |
Large Decorative Weather Vane Roof Mount (for most sizes)
14"L x 19"H x 4"W....
For all Good Dimensions "Signature Series" weathervanes, and also models 616, 656, 669, 670, 671 and 907
You Save! 7% |
|
|
 |
11" Brass Extension Rod
This 11" brass extension rod is needed to lift a Good Directions weather vane above the top of any of our 30" square or larger cupolas. Any number of rods can be added for whatever length is needed to reach the mounting point inside your cupola. (not for Uppder Deck or Whitehall vanes)
|
|
|
 |
11" Steel Extension Rod
This 11" powder-coated steel extension rod is needed to lift a Good Directions weather vane above the top of any of our 30" square or larger cupolas. Any number of rods can be added for whatever length is needed to reach the mounting point inside your cupola. (not for Uppder Deck or Whitehall vanes)
You Save! 25% |
|
|
 |
18" Replacement Rod (both large and small rod)
This is a replacement rod for full-size Good Directions weathervanes. It has both the larger steel rod and the smaller steel rod that the weathervane slides onto.
|
|
|
 |
Cast Iron Display Base
Display your Good Directions weathervane with this cast iron floor stand. Weathervane screws into top rod. 12" base, 18" high. (weathervane in photo, not included)
|
|
|
 |
Decorative Brass Display Base (21" high)
You Save! 25% |
|
|
 |
Americana Mantel Base
Display your weather vane on the mantel with this base. 24"L x 4"W.
|
|
|
 |
43" Yard and Garden pole (for full size weathervanes)
|
|
|
 |
43" Yard and Garden pole (for "Cottage" Weathervanes)
|
|
|
 |
Deck Bracket (for "Cottage" Weathervanes)
|
|
|
 |
5" Eave Mount (for "Cottage" weathervanes)
For "Cottage" size weather vanes. Allows mounting a weathervane to the side of your home with no more than a 4 1/2" roof overhang (the rod holding your weather vane must clear the roof).
|
|
|
 |
Adjustable Aluminum Roof Mount for Cottage Weathervanes
Adjustable Aluminum Roof Mount with stainless steel screws. This mount is only for use with our smaller "Cottage Series" weathervanes.
|
|
|
 |
Shepards Hook
|
|
|
 |
Jet Spray spray lacquer(12 oz.)
|
|
|
|
Cupola Extensions
If the pitch (angle) of your roof is more than the normal 10/12, you will need to extend the base of your cupola.
|
|
